 |
-
JIS Z8901 CLASS4試驗粉塵
詳細信息| 詢價留言級別：超純、高純 規格：JIS Z8901 CLASS4 貯藏：* 含量：* % 品牌：class4 型號：class4 產品型號：JIS Z8901 CLASS4粉塵
產品特點：JIS Z8901 CLASS4，JIS Z8901試驗粉塵，JIS試驗粉塵雜質，美國亞利桑那試驗粉塵#IEC 60312試驗粉塵#ISO 12103試驗粉塵 耐塵試驗箱，耐水試驗箱，耐光試驗箱，鹽霧腐蝕試驗箱，恒溫恒濕試驗箱，冷熱沖擊試驗箱
JIS Z8901 CLASS8粉塵JIS Z8901 CLASS17試驗粉塵中國*大進口商的詳細資料：
亞利桑那試驗粉塵#IEC 60312試驗粉塵#ISO 12103試驗粉塵 ，韓國ITC沙塵試驗箱ISO 12103-1 A1 Ultrafine Test Dust；ISO 12103-1 A2 Fine Test Dust；ISO 12103-1 A3 Medium Test Dust ISO 12103-1；A4 Coarse Test Dust
5.8.1 Dust Tests.粉塵測試
目的:用來確定當有風沙和路面灰塵干擾時,附件能否提供充分的保護使得DUT繼續達到CTS中所指明的運行要求。
過程(操作方式1.2)：測試根據ISO20653針對水等物體的防護。測試須使用ISO12103-1,A2優良等級，同時，粉塵需持續8個小時。
標準：功能狀態須為A級
DUT應避免受損,破壞功能,或降解其性能。DUT在清潔前須通過功能/參數測試。
0微米至指定尺寸的等級 名義尺寸范圍
(µm)材料品種 0 –5 Fe2O3 (Hematite，赤鐵礦)
Fe3O4
(Magnetite，磁鐵礦)0 – 10 Fe2O3 (Hematite，赤鐵礦)
Fe3O4
(Magnetite，磁鐵礦)可接受的尺寸范圍是指0微米至指定的尺寸產品中，指定至少包含指定尺寸的顆粒的體積百分為96%。 中等級別產品 名義尺寸范圍
(µm)材料品種 5 – 10 Fe2O3 (Hematite，赤鐵礦)
Fe3O4
(Magnetite，磁鐵礦)中等級氧化鐵產品按體積百分比計算，至少包含80%上面指定的尺寸的顆粒。 0微米至指定尺寸的等級 名義尺寸范圍
(µm)材料品種 0 – 5 Fe2O3 (Hematite，赤鐵礦)Fe3O4
(Magnetite，磁鐵礦)0 – 10 Fe2O3 (Hematite，赤鐵礦)Fe3O4
(Magnetite，磁鐵礦)可接受的尺寸范圍是指0微米至指定的尺寸產品中，指定至少包含指定尺寸的顆粒的體積百分為96%。 中等級別產品 名義尺寸范圍(µm) 材料品種 5 – 10 Fe2O3 (Hematite，赤鐵礦)Fe3O4
(Magnetite，磁鐵礦)中等級氧化鐵產品按體積百分比計算，至少包含80%上面指定的尺寸的顆粒。
美國亞利桑那試驗粉塵#IEC 60312試驗粉塵#ISO 12103試驗粉塵 ，韓國ITC沙塵試驗箱
品牌: 美國PTI
型號:ISO12103-1 A1 Ultra
ISO 12103-1 A1 Ultrafine Test Dust A1粉
PTI 是具備ISO 等級試驗粉塵及特殊定制粉塵分布的領先制造商和經銷商。具體請閱讀：“試驗粉塵的歷史”來了解PTI在生產ISO12103-1標準中規定的4個等級試驗粉塵的角色。*的工程技術，良好的發展狀態，保密產權程序的實施，徹底的分析調查及每個階段材料處理的評估都讓PTI對其客戶無論從競爭者或增值服務都脫穎而出。
典型的化學成分分析化學成分 重量百分比 化學成分 重量百分比 Si02 68 - 76 Ca0 2.0 - 5.0 Al203 10 - 15 Mg0 1.0 - 2.0 Fe203 2 - 5 Ti02 0.5 - 1.0 Na20 2 - 4 K20 2.0 - 5.0 *Loss on Ignition 2 – 5%
ISO 試驗粉塵顆粒分布(體積百分比小于)尺寸(微米) ISO 12103-1, A1
超細試驗粉塵1 1.0 – 3.0 2 9.0 – 13.0 3 21.0 – 27.0 4 36.0 – 44.0 5 56.0 – 64.0 7 83.0 – 88.0 10 97.0 – 100 20 100 40 -- 80 -- 120 --
PTI粉塵灰灰塵ACFTD灰塵ISO 12103-1 A2 Fine Test Dust A2粉 ISO 12103-1 A4 Coarse Test Dust A4粉 ISO 12103-1 A3 Medium Test Dust A3粉MTD粉塵 Arizona Test Dust Fractions 亞利桑那試驗粉塵MIL 810E4 Silica Sand & Dust Iron Oxide 波特蘭水泥 Type I Glass Beads 玻璃珠 PV 樹脂(噴融樹脂) 汽車安全帶測試粉塵ECE R16, Section 7.6.3.2 (GB 14166, Section 5.6.3.2液SoftC-2A Quartzose Mineral Dust DMT emission test dust (IEC 60312 5.1.2.5) Test Dust Type 8® DMT test dust type 8 (IEC 60312 5.1.2.3) Quartzose Mineral DMT carpet test dust (IEC 60312 5.1.2.2) DMT Dolomite Sand (IEC 60312 5.1.2.1)A2 ISO 細灰 A4粗灰 亞利桑那沙子亞利桑那試驗粉塵 美國ISO MTD粉塵A2測試粉A3中級試驗粉塵AC DUST A2 粉塵 ISO 試驗粉塵 亞力桑那A2粉塵 美國PTI碳黑粉塵 ISO 12103-2 M2鋁粉 A2 ISO 細灰 ISO 12103-2 M3鋁粉 ISO 12103-2 M4鋁粉ISO 12103-2 M5鋁粉JIS CLASS 2級粉塵 PTI 粉塵Nominal 0-5 Arizona Test Dust PTI 粉塵Nominal 10-20 Arizona Test Dust PTI 粗粉 PTI 粉塵Nominal 20-40 Arizona Test Dust 試驗用粉塵12103-1 A2類粗粉粗灰美國亞利桑那A1粉 FLY ASH 飛灰Portland Cement波特蘭水泥美國亞利桑那M5粉APPIE JIS Z 8901 CLASS 1 試驗粉塵APPIE JIS試驗用粉體1 8種APPIE關東粉APPIE JIS test powders 1 class8 日本粉體工業技術協會APPIE APPIE JIS Z 8901 試驗用粉體1，CLASS 8 APPIE JIS Z 8901 CLASS 15粉塵COTTON LINTERS 棉花纖維鐵粉(赤)氧化鐵 Carbon Black炭黑Ashrae test dust with carbon black 試験用粉體１の7種, 8種, 11種JIS粉塵是依據JIS(Japanese Industrial Standard，即日本工業標準)生產的試驗粉塵，常被用于一些日系產品的檢測。本公司可為廣大國內用戶提供日本進口的下述檢測雜質，包括JIS Z 8901的試驗粉塵和玻璃珠產品；請在與我們聯系的時候描述清楚您需要的是下面哪種產品Quartz sand Talc Fly ash KANTO (Japanese) loam Carbon black Calcium- carbonate (heavy) Glass beads GBL type Glass beads GBM type White fused alumina JIS Z8901 1 種(硅砂) JIS Z8901 3 種(硅砂)JIS Z8901 4 種(滑石粉)JIS Z8901 7 種(關東粉)JIS Z8901 8 種(關東粉)鐵粉0-5微米Fe3O4鐵粉(赤)0-5微米Fe2O3 鐵粉(赤)5-10微米Fe2O3 棉花纖維COTTON LINTERS
美國亞利桑那試驗粉塵#IEC 60312試驗粉塵#ISO 12103試驗粉塵 ，韓國ITC沙塵試驗箱
我司代理的美國PTI試驗粉塵應用在包括濾清器行業，電子行業等；德國DMT試驗粉塵對于房屋通風系統過濾器應用比較廣泛；而日本JIS試驗粉塵的也應用在濾清器行業和電子行業；下表列出了來自美國PTI公司***網站的常用的濾清器行業檢測標準；
Filtration Standards,
&
SpecificationsContaminants
RequiredComments &
InformationANSI B93.31: Multipass Method for Evaluating the Filtration Performance of a Fine Hydraulic Fluid Power Element ISO 12103-1, A2 Fine Test Dust (AC Fine Test Dust per standard is obsolete) B93.31: Hydraulic Filter Multipass Method is cancelled. ISO 16889 has replaced the ANSI B93.31 & NFPA T3.10.8.8 documents ISO 4020: Road Vehicles - Fuel Filters for Diesel Engines ISO 12103-2, M1 and M2 Aluminum Oxide Test Dusts An Organic Contaminant is also required, see 4020 standard for details. ISO 4548-4: Initial Particle Retention Efficiency, Life & Cumulative Efficiency (gravimetric method) ISO 12103-1,A2 Fine Test Dust ISO 12103-2, M2, M3, M4 and M5 Aluminum Oxide Test Dust Life & Cumulative Efficiency uses A2 Fine Test Dust Initial Particle Retention uses M series of Aluminum Oxide Test Dust ISO 4548-12: Filtration Efficiency using Particle Counting, & Contaminant Retention Capacity ISO 12103-1, A3 Medium Test Dust SAE J 1858 Oil Filter Multipass Method is cancelled. ISO 4548-12 has been adopted by SAE ISO 4572: Hydraulic Fluid Power-Filters - Multipass Method ISO 12103-1, A2 Fine Test Dust (AC Fine Test Dust per std. is obsolete) SAE J 726 Air Cleaner Test Code is cancelled. ISO 5011 has been adopted by SAE ISO/TS 11155-1: Road Vehicles - Air Filters for Passenger Compartments Part 1: Test for Particulate Filtration ISO 12103-1, A2 Fine Test Dust SAE J 1669-1: Cabin Particulate cancelled.ISO/TS 11155-1 has been adopted by SAE ISO/TS 13353: Diesel Fuel & Petrol Filters for Internal Combustion Engines - Initial Efficiency by Particle Counting ISO 12103-1, A3 Medium Test Dust ISO/TS 13353 is cancelled & withdrawn. ISO 19438 has replaced 13353 ISO 16889: Hydraulic Fluid Power Filters - Multipass Method for Evaluating Filtration Performance of a Filter Element. ISO 12103-1, A3 Medium Test Dust ISO 16889 has replaced 4572 Hydraulic Filter Multipass Test Method ISO 19438: Diesel Fuel & Petrol Filters for Internal Combustion Engines - Filtration Efficiency using Particle Counting & Contaminant Retention Capacity ISO 12103-1, A3 Medium Test Dust ISO 19438 has replaced 13353 Fuel Filter Initial Efficiency ISO/CD19713: Inlet Air Cleaning Equipment for Internal Combustion Engines & Compressors -Fractional Efficiency Testing ISO 12103-1, A2 Fine Test Dust and A4 Coarse Test Dust This Standard is under development by ISO/TC22/SC7/WG3 Air & Oil Filters JIS D1608: Fuel Filter Test Method for Automotive Gasoline Engines JIS Z 8901, Class 8 (fine) Test Dust ISO 12103-1, A2 Fine Test Dust may be substituted if listed in test report and/or with customer agreement JIS D1611: Automotive Parts - Test Methods of Lubricating Oil Filters SOFTC-2A Gravimetric Test Method JIS D1617: Automotive Parts - Fuel Filters for Diesel Engines Test Methods An Organic Contaminant is also required, see D1617 standard for detail. ISO 12103-2Aluminum Oxide Test Dusts JIS Z 8901 Class 8 (fine) Test Dust ISO 12103-1, A2 Fine Test Dust may be substituted for JIS Z 8901 Class 8 Test Dust if listed in test report and/or with customer agreement NFPA T3.10.8.8: Hydraulic Fluid Power-Filters - Multipass Method for Evaluating Filtration Performance ISO 12103-1, A2 Fine Test Dust (AC Fine Test Dust per standard is obsolete) T3.10.8.8 Hydraulic Filter Multipass Method is cancelled. ISO 16889 has replaced the NFPA & ANSI B93.31 documents SAE J 726: Air Cleaner Test Code ISO 12103-1, A2 Fine Test Dust and A4 Coarse Test Dust SAE J 726 Air Cleaner Test Code is cancelled. ISO 5011 has been adopted by SAE SAE HS- 806: Oil Filter Test Procedure Section 6: Filter Capacity & Contaminant Removal Characteristics of Full-Flow Oil Filters ISO 12103-1, A2 Fine Test Dust SOFTC 2A Gravimetric Test Method for Overall Efficiency & Capacity SAE HS- 806: Oil Filter Test Procedure Section 7: Single Pass Particle Retention Capability Test Broad Range within 29-470 μm of glass beads Narrow Range in 10 μm fractions of glass beads Natural ISO 12103-1, A4 Coarse Test Dust in full range or fractions thereof Gravimetric Test Method for Single Pass Efficiency SAE J 905: Fuel Filter Test Methods ISO 12103-1, A2 Fine Test Dust Gravimetric Test Method for Efficiency & Capacity SAE J 1669-1: Passenger Compartment Air Filter Test Code - Particulate Filtration ISO 12103-1, A2 Fine Test Dust SAE J 1669-1 is cancelled.ISO 11155-1 has been adopted by SAE SAE J 1858: Full-Flow Lubricating Oil Filters Multipass Method for Evaluating Filtration Performance ISO 12103-1, A3 Medium Test Dust SAE J 1858 is cancelled.ISO 4548-12 has been adopted by SAE SAE J 1985: Fuel Filters - Initial Single Pass Efficiency Test Method ISO 12103-1, A2 Fine Test Dust Particle Counting Fuel Filter Test Method- Fractional Efficiency
美國亞利桑那試驗粉塵#IEC 60312試驗粉塵#ISO 12103試驗粉塵 ，韓國ITC沙塵試驗箱
Q2、PTI公司的ISO等級的試驗粉塵的密度(單位體積重量)大概是多少？
1、 ISO 12103-1 A1 Ultrafine – 500 kg/m3
2、 ISO 12103-1 A2 Fine – 900 kg/m3
3、 ISO 12103-1 A3 Medium – 1025 kg/m3
4、 ISO 12103-1 A4 Coarse – 1200 kg/m3
美國亞利桑那試驗粉塵#IEC 60312試驗粉塵#ISO 12103試驗粉塵 ，韓國ITC沙塵試驗箱
Q3、請問 SAE Fine Test dust 是否等同于 ISO 12103-1 A2 Fine Test Dust? SAE J726 試驗粉塵和 ISO 12103-1 A2 Fine試驗粉塵之間有何區別?
ISO 12103-1, A2 細試驗粉塵與1993年之前PTI公司生產的 SAE Fine Test Dust 是相同的。只是由于鑒于依據 ISO 12103-1 標準的測量儀器的升級，其報告的顆粒尺寸要略小一點點。 SAE J726 標準已在2002年作為并由 ISO 5011 取代，ISO 5011 指定使用滿足 ISO 12103-1 標準的試驗粉塵。關于這個問題的詳細信息，點擊此處訪問試驗粉塵的歷史。
美國亞利桑那試驗粉塵#IEC 60312試驗粉塵#ISO 12103試驗粉塵 ，韓國ITC沙塵試驗箱
Q4、貴司提供的美國PTI粉塵在過濾行業中的應用表格很有幫助，能否對于德國DMT粉塵的應用也提供類似的表格呢？(2008-11)Contaminants Standards,& Specifications Comments &Information DMT test dust type 8 ®(Simulated house hold dust) IEC 60312 Ed. 4, 2007,
Chap.5.1.2.3Composition is described in the standard Mineral dust (dolomite sand) IEC 60312 Ed. 4, 2007,
Chap.5.1.2.1Particle size composition -see standard Carpet test dust IEC 60312 Ed. 4, 2007,
Chap.5.1.2.2Particle size composition -see standard Emission test dust IEC 60312 Ed. 4, 2007,
Chap.5.1.2.5Particle size composition -see standard Customized test dusts or mixture preparations 美國亞利桑那試驗粉塵#IEC 60312試驗粉塵#ISO 12103試驗粉塵 ，韓國ITC沙塵試驗箱
Q5、ASHRAE和ANSI是什么意思？
ASHRAE 是 American Society of Heating Refrigerating and Airconditioning Engineers 的縮寫，意思是美國采暖, 制冷與空調工程師學會；
ANSI 是 American National Standards Institute 的縮寫，意思是美國國家標準協會；
Q6、同樣尺寸塑料瓶裝的ISO 12103-1 A2 Fine試驗粉塵的重量為何比ISO 12103-1
A4輕約一公斤？按理說A2粉塵含有更多小顆粒，那應該重量更重才對��？為何實際情況正好相反？
ISO 12103-1 A2 Fine Test Dust 的確是含有更多的小顆粒，同樣容積的塑料瓶內A2的試驗粉塵顆粒數目也相對于ISO 12103-1 A4 Coarse Test Dust 更多�！ 〉牵^大尺寸的粉塵顆粒本身的重量較之小顆粒要更重，雖然A4粉塵的數量不及A2多，但重量卻更重；另外，每個單獨的粉塵顆粒之間會有空氣存在，因此越多顆粒，也就意味著越多的空氣，這樣的后果就是較低的容重。比如一加侖罐子裝0-3微米亞利桑那道路試驗粉塵，其重量大概只有1.5公斤，而同樣罐子裝ISO粗灰，則重達4.5公斤。
美國亞利桑那試驗粉塵#IEC 60312試驗粉塵#ISO 12103試驗粉塵 ，韓國ITC沙塵試驗箱
德國KSL Eskal 300, Eskal 500, Eskal 10, Eskal 15, Eskal 20, Eskal 30, Eskal 45, Eskal 60, Eskal 80, Eskal 150 fractions of natural calcium carbonate德國KSL Esstar 15, Esstar 20, Esstar 30, Esstar 45, Esstar 80 fractions of native starch德國KSL Eszet 15, Eszet 20, Eszet 30, Eszet 45, Eszet 80 fractions of sugar德國KSL Esqua fractions of quartz SiO2德國KSL Arizona staub fine/coarse synthetic,according SAE J 726B Rev,Jun.93 Table 4德國KSL Quarzstaub according ECE 6-16德國KSL Talkumstaub according IEC 529,EN 60529,DIN VDE 0470 Tell 1德國KSL Prufstaub nach DIN 40050噴灰裝置 噴灰器 噴沙塵工具 噴試驗粉塵裝置 噴試驗粉塵器 噴試驗粉塵工具 -
-
產品搜索
留 言
- 聯系人：錢先生
- 電 話：13801662380
- 郵 編：201204
- 地 址：上海市浦東新區滬南路2218號東樓1812房間
- 網 址： https://shrbmy.cn.goepe.com/
http://www.dreamingwings.com
